Alesis 03D Owner'S Manual Download

Page: 177 / 302

Storing Mix Scenes

167

03D—Owner’s Manual

press and hold the left mouse button, and then drag the mouse.

The number and title of each scene memory flashes as it’s selected. Scene memories that
do not contain data have the title No Data!

4. Use the cursor buttons to select the STORE switch, and then press the

[ENTER] button (you could press the [STORE] button instead).

The Title Edit dialog box appears.

5. Enter a title for the mix scene.

See Title Edit Dialog Box on page 33 for more information.

6. Press OK on the Title Edit dialog box.

The mix scene is stored to the selected scene memory, the scene memory number stops
flashing, and the EDIT indicator disappears.

Summary of Contents for 03D















































































































































































































































































































Search results

Summary of Contents for 03D

Reviews:

Related manuals for 03D

Brands by name

Popular brands

Alesis 03D, Owner'S Manual

Search results

Summary of Contents for 03D

Reviews:

Related manuals for 03D

Brands by name

Popular brands