This symbol indicates there are warnings and precautions associated with the use
of this equipment that should be carefully read and understood before using the
equipment
!
This symbol indicates where a Patient Applied part is connected, for which it is
important to follow these instructions carefully
Safety Instructions and Warnings
1. Ensure the voltage & current rating of remote signalling equipment (Nurse Call etc) does not
exceed the maximum allowed (50v/100mA)
2. Ensure that the senor cable is routed and secured to avoid the risk of entanglement or stran-
gulation.
3. Only the recommended power supply shall be used as it is certified to provide two means of
patient protection to EN60601-1
4. Ensure the power cable is routed to avoid a trip hazard
5. Regularly check the power supplies for damage and potential shock risks
6. Clean and disinfect each item regularly in accordance with information on page 7
7. Ensure, by testing, that the alarm is annunciated at the carer's location(s)
8. Regularly sensors test as defined herein
9. Use only the power supply and batteries recommended
10. Operate power supply and charge pager away from direct heat and uncovered.
11. As with all medical electronic equipment there is potential for the equipment to interfere with
or be effected by interference from other electrical or electronic devices. For this reason
avoid placing the monitor, sensor or connecting cable in close proximity to sensitive electron-
ic devices or devices which produce strong electromagnetic fields such as radio transmitters,
mobile phones or power cables.
12. Only use the monitor with accessories approved for use with this product and only in accord-
ance with instructions.
13. If the equipment is modified in any way, appropriate inspection and testing must be conduct-
ed to ensure continued safe use of the equipment.
14. The carer must conduct a risk assessment to determine if the level of reliability offered by
the monitor is sufficient or if additional monitoring is needed. Contact the manufacture for
assistance with Risk Evaluation Tools.
15. Additional levels of mechanical protection may be needed for some patient disorders. Con-
tact the manufacturers for advice
16. Some accessories are fitted with small screws and have plastic bags. Ensure these do not
come into the possession of vulnerable patients who might choke on them
17. Any sensor over the mattress (Bed Vacation or Incontinence) has the potential to cause
pressure sores . The carer must assess this risk and monitor the use of these products
18. Any sensor over the mattress could pose a fire hazard if in contact with a smouldering ciga-
rette.