www.aleratec.com
5
Insert the eSATA cable included in one of the ports in the host adapter you
10.
just installed.
Insert the other end of the eSATA cable to the eSATA port in the back of
11.
your 1:3 Copy Cruiser BLU HLX.
Connect the power cord and power on the 1:3 Copy Cruiser BLU HLX.
12.
Restart your computer.
13.
During OS boot up, Windows will display the “Found New Hardware
14.
Wizard” for the “Mass Storage Controller”.
Select “Install from a list or specific location (Advanced)” and click “Next”;
15.
make sure the software and documentation CD is in the CDROM drive in
your computer.
Select “Search for the best driver in these locations” and check “Include this
16.
location in the search:”; then uncheck the other boxes.
Type in D:\ (If your CD-ROM/DVD is D:\), then click “Browse”.
17.
Specify a location, for example:
18.
D:\SATAExpress_2Port\Sil3132\WinXP_2000_2003_NT
and click “OPEN”, then “OK”.
When the wizard indicates that it found a driver for the device, click “Next”.
19.
The wizard will now copy the required files to the system and start the
20.
Driver. After starting the driver the wizard will display a completion dialog;
click “Finish” to exit the wizard.
Go to My Computer and you should see the three Blu-ray drives in your 1:3
21.
Copy Cruiser BLU HLX.
Note: Detailed instructions and information on using the Roxio software
is included in the software’s Help section.
