Remove the plastic cover from the top door hinge
Unscrew the two screws from the bottom bracket.
Remove the foot glide from othe opposite side
Set parts aside
Slide the refrigerator door downward about 6 inches and
off the top hinge pin
Remove the two screws from the top bracket and replace
on the other side. You will need to
remove the plastic
caps from the other side
Slide the refrigerator door back onto the top hinge.
Ensure
it is the “right way up”
Screw the bottom hinge into place on the new side.
Replace the foot glide on the other side.
Place the plastic cover by clicking back into position on the
door hinge
Check that the door is aligned horizontally and vertically
and that the seals are closed on all sides before
tightening the bottom hinge. Readjust the leveling feet
1
3
5
6
2
4
7
4
CHANGING REVERSIBLE DOOR
Unplug and empty the refrigerator
Adjust the two leveling feet to their highest position
Tools Required:
Phillips Screw Driver
NOTE:
• Tilt the appliance backward to remove the door.
• Rest the refrigerator on a solid surface e.g. chair just below the top panel in order to access the
bottom of the refrigerator.
• DO NOT
lay the appliance completely
as this may damage the coolant system