Alencon SPOT: Installation,
Operation, and Maintenance Manual
31 |
P a g e
F
IGURE
21:
SPOT
M
OUNTING
I
NSTRUCTIONS
8.4.4 Mounting Procedure – Horizontal Rack Mount
To properly install the SPOT into a Rack:
1)
SPOT with FEED shown in Figure 22 can be unpackaged and lifted onto a table or work
bench to attach mounting brackets (
Error! Reference source not found.
)
2)
Using (4) of the provided ¼”-20 x 3/4 Self Tapping-Type F Screws [P-005533], securely
attach the left and right mounting brackets to the SPOT unit’s side, so that ‘wings’ are
flush to the front face
3)
SPOT can be lifted and placed into the rack
4)
SPOT may have a designated place within the cabinet, denoted by a numbered label on
the front face which should be matched to the assigned location.
5)
Use 4 screws to secure each SPOT unit to the rack through the mounting brackets.
