Service Guide
SER 7338-C
7338-C
Alemite Corporation
PO Box 473515, Charlotte, North Carolina 28247-3515
www.alemite.com
Copyright
©
2000 by Alemite Corporation
This document contains confidential information that is the property of Alemite Corporation
670778
and is not to be copied, used, or disclosed to others without express written permission.
Revision (12-07)
Severe-Duty Welding Hose Reel
Description
WARNING
Hose reel model 7338-C is de-
signed to deliver acetylene and oxygen
only.
Do not use with any other fuel gas.
Personal injury can occur due to explo-
sion.
WARNING
The bore of any reel component
that contacts fuel gas must be free of any
petroleum-based material.
Personal injury can occur due to explo-
sion.
Hose reel model 7338-C is designed:
• for use on a truck
• to mount to a ceiling* or wall
The reel is spring-powered and self-
retracting. When the hose is extended, the reel
can be latched on either of two ratchet sections
per revolution of the sheave. A pull releases the
latch from the ratchet and allows the hose to
retract onto the reel.
Fuel-Gas Swivel Assembly
The fuel-gas swivel assembly has 9/16-18
hose connections. The oxygen connection is
right-hand threaded and the acetylene is
left-hand.
Twin-Welding Hose
The reel handles a maximum of 50 feet of
1/4 " ID twin-welding hose.
Figure 1
Severe-Duty Welding Hose Reel Model 7338-C
Oxygen Inlet
Acetylene Inlet
Reel Max. Pressure
psi
Bars
1/4 " NPTF (f)
1/4 " NPTF (f)
200
13.8
Caution
* The base of the reel must be at a height no greater than
20 feet (6.1 m) from the floor to comply with the warranty.
