17
Reset settings:
(only available when using an internal Wi-Fi network connection)
In this menu, you can reset all settings back to the factory settings.
The SSID and password will also default back to the factory setting.
It may be that the camera will need to be re-registered.
The reset switch located at the bottom of the camera will reset the camera. Press this
switch for at least 10 seconds in order to reset the camera.
5
OTHER FUNCTIONS
5.1 HOW TO USE IN THE DARK
The IVM-200 camera has built in infrared LEDs which illuminate the room for the
camera when it is dark. The image on the screen will be colourless. The LEDs will
automatically turn on when the room starts to get dark. A slight flicker in the image
may occur if the brightness of the room dims and the LEDs come on. If there is a
continued decrease of brightness in the room, the image will stop flickering. The
camera will light up around 3 meters from the vicinity of the camera.
5.2 CONNECTING TO THE CAMERA USING THE APP
If some changes occur to the settings of the camera, the camera will reboot and
connect to the network again. During this process it will not be possible to make
connection with the camera through the app. Wait a few minutes and try to connect
again.
Summary of Contents for IVM-200
Page 1: ...USER MANUAL IVM 200 SMART BABYCAMERA iOS...
Page 2: ...2...