3.5 Roger Beep
The Roger Beep is a tone which is automatically transmitted
whenever the PTT button is released. This alerts the
receiving party that you have ended the transmission, and
you are now in receive mode.
3.6 Changing Channels
The PMR has 8 available channels. To change channels, in
normal mode;
a. Press the MENU button, the channel icon “1 ” on the LCD screen
will start blinking.
b. While the Channel icon is blinking, press the (UP) or
(DOWN) button to select the desired channel. The
channel changes from 1 to 8, or from 8 to 1.
c. Press the MENU button to confirm your selection and return to
the normal mode.
3.7 Setting to Power Hi/Low
a. Press the MENU button, the current Power setting is blinking
b. Press the (UP) or (DOWN) button to select the desired
power settings.
c. Press the PTT button to confirm the setting.
3.8 Monitor
You can use the Monitor feature to check for weak signals on the
current channel.
a. To activate the Monitor function, press the MENU and the (UP)
button at the same time.
b. If you hear constant noise and hissing sound, press the MENU
button once to turn off the Monitor function.
Note:
·
Refer to the "Channel Table" section of this Owner’s Manual
for detailed frequency listing.
3.9 Channel Scan
Channel scan performs searches for active signals in an
endless loop from channels 1 to 8. This allows you to find other
radios without having to change channel. To activate this
feature;
a. Press and hold down the (UP) or (DOWN) button for 3
seconds. The channel number on the LCD Screen changes
rapidly until an active signal is detected.
b. When an active signal (one of the 8 channels) is detected,
channel scan pauses on the active channel.
c. Press the PTT button to communicate through the active signal
channel, and the channel scan will be deactivated. (OR press
the (UP) or (DOWN) button to continue the channel
scanning.)
d. Press the MENU button to stop the channel scanning operation.