8
-
unfix latch from case
-
fix a latch on the panel using two screws (4mm diameter) according to figure C.2;
Use two screws with a diameter 4 mm to fasten a latch on the panel. Screws should not overhang
mounting plane of the latch.
When mounting the transducer on latch, it is necessary to provide free space of at least 15 mm for
first mounting of transducer.
2.3.4
Put a main lead of measured circuit trough the hole of the transducer.
2.3.5
Fix wires to output terminals with respect to polarity.
2.3.6
Make sure that transducer input signal range is suitable for measuring current of the circuit.
2.3.7
Turn on an input signal on the transducer.
2.4 Operation in case of emergency
2.4.1 In case of emergency, input signal should be immediately turned OFF.