6
ADDITIONAL FEATURES AND SETTINGS
CHANGE SEND / RECEIVE CHANNEL:
Baby unit:
1. Push 1x on the
MENU
button, after the channel indicator light [CH] comes on
2. Push on the button
or
to select a new channel (1-8)
3. Push on the button
MENU
to set the new channel
Parent unit:
1. Push 1x on the button
; the channel display will start flashing
2. Push on the button
or
to select a new channel (1-8)
3. Push on the button
PTT
to set the new channel
CHANGE SUB CHANNELS (CTCSS):
Baby unit:
1. Push 2x on the button
MENU
; the sub channels will show up in large with
the letters [Ct] behind.
2. Use the buttons
or
to select or disable the sub-channel (1-38) or to
enable or disable this feature by setting sub-channel to 00.
3. Push on the
MENU
button to set the selected sub-channel.
Parent unit:
1. Push 2x on the
button; the sub-channel indicator will begin to flash.
2. Use the buttons
or
to select or disable the sub-channel (1-38) or to
enable or disable this feature by setting sub channel to 00.
3. Push the
PTT
button to set the selected sub-channel
ENSURE THAT THE PARENT UNIT
AND BABY UNIT ARE ON THE
SAME CHANNEL AND THAT THE
SAME SUB-CHANNELS ARE
SELECTED.
ALSO SEE PAGE 10, CHAPTER
ENTITLED ‘BABY MULTIPLE
UNITS’.
6
Explanation of the CTCSS code:
Continuous Tone Controlled
Squelch System is the tone code
that is sent when transmitting. This
code is not an audible tone.
Only when the tone code from the
baby unit corresponds to the tone
code from the parent unit, will the
parent unit display the signal. This
prevents the baby monitor from
interference from other devices
that may communicate on the
same channel.
Summary of Contents for DBX-92
Page 1: ...DBX 92 USERS MANUAL...
