![Alecto ACL-10 Manual Download Page 5](http://html1.mh-extra.com/html/alecto/acl-10/acl-10_manual_2893508005.webp)
5
DAILY MAINTENANCE:
1. Switch off the humidifier and remove the plug from the wall socket
before any maintenance.
2. Lift the humidifier’s reservoir up from the base.
3. Empty the water reservoir into the sink, thoroughly rinse it out and
remove any sediment or dirt. Wipe the water reservoir clean and dry it
with a clean, soft cloth or kitchen towels.
4. Fill the water reservoir with fresh demineralised or distilled water,
replace the cap onto the reservoir and replace the reservoir onto the
base.
WEEKLY MAINTENANCE:
1. Repeat steps 1-3 for daily maintenance.
2. Pour out any water left behind in the base, making sure the power is
disconnected before moving it.
3. Pour a cup of white vinegar (approx. 200 ml) in the lower part of
the base, this is where the transducer is located, and let it work for
15 minutes. Now use the soft brush from the base to loosen the
deposits in the base and especially in the transducer.
4. Remove the deposits and the white vinegar solution with a clean, soft
cloth.
5. Rinse out the base with water to ensure that no vinegar is left behind
in the base. Don’t immerse the base in water, but only rinse out the
lower part of the base.
6. Fill the water reservoir with fresh demineralised or distilled water,
replace the cap onto the reservoir and place the reservoir back onto
the base.