6 Aldon® Spot Check Magnetic Laser Gauge #4022-26
Aldon Company, Inc. | 847.623.8800 | [email protected] | ALDONCO.com 3
Place the
SPOT CHECK MAGNETIC LASER GAUGE
horizontally on the rail
head with the foot of the laser against the gauge-face of the rail. Two
magnets will secure the
device
to the rail until adjustments are made.
The foot of the laser’s base is designed to contact the rail approximately
5/8” down from the top of the top of the rail head. It is also designed to
clear most cases of rail flow.
MEASURING TRACK GAUGE
Press the
POWER KEY
located on the key pad.
Step 1. Turn Power On
POWER KEY
NOTE:
When placing the laser on the rail, make sure
both thumb screws are fully backed out.
Step 2. Install the Laser On Rail
RECOMMENDED PRODUCTS
SaberTooth
® Portable 2-Way
Locomotive Derail
4014-08-S
SaberTooth
® Portable Derail
Left Throw
4014-06-S
SaberTooth
® Portable Derail
Right Throw
4014-07-S
Magnetic Mini-Light
For Sign Holders
4015-32
Derail Padlock
3/8” x 2-2/2” Shackle
4124-97
Replacement Derail Sign Plate
4015-71
Blue
4015-72
Red
Additional Derails and
Derail Accessories Available
The laser will be activated and begin taking
continuous readings.
Step 3. Taking Measurements
Aim the
laser at the opposite rail, adjust both thumb screws until
the laser is approximately 5/8” below the top of the rail.
RED ARROW KEY
The measurement will be displayed on
the screen. If you want/need to pause
from taking measurements, press the red
arrow key on the keypad.
