Operation and functioning
27
GB IRE
AFTER SALES
SUPPORT
GB
IRE
00800 34 99 67 53
meister-service@meister-werkzeuge. de
and safety when working in low-light areas. The work-
ing light goes out when the On/Off switch is released.
Determining the direction of rotation
You can use the cordless screwdriver to drive screws in
and remove them. Proceed as follows to set the direction
of rotation:
1.
Driving in screws:
Push the switch for right-handed/
left-handed rotation
6
on the right side of the
cordless screwdriver handle
2
into the housing.
2. Insert the screwdriver bit so that it is in the middle of
the screw head.
3. Carefully depress the On/Off switch with built-in light
switch
5
.
The screwdriver bit and the bit receptacle will rotate
to the right and the screw will be driven into the
wood.
4.
Removing screws:
Push the switch for right-handed/
left-handed rotation on the left side of the cordless
screwdriver handle into the housing.
5. Insert the screwdriver bit so that it is in the middle of
the screw head.
6. Carefully depress the On/Off switch with built-in light
switch.
The screwdriver bit and the bit receptacle will rotate
to the left and the screw will be removed.
