manualshive.com logo in svg

ALDI P50696, Manual

Share
Download
ALDI P50696 Manual Download Page 50

Pxxxxx

50

appendix 1

What is raID?

RAID, short for Redundant Array of Independent Disks, is a combination of two or more disks with
the aim of providing fault tolerance and improving performance. There are several different levels
of RAID, with each providing a different method of sharing or distributing data amongst the drives.
The NAS server supports RAID levels 0, Linear and 1.

advanced definition of raid 0 and raid linear
raID

 

0

 provides data striping, which spreads

out blocks of data over both drives, but does not
provide data redundancy.
Although performance is improved, the lack of
fault tolerance means that if one drive fails, all
data in the array will be lost.

raID linear 

is much like RAID 0 except that data is

Stored randomly across the disks, not stiped

Simple definition of raid of raid 0 and raid linear
raID 0 and raID linear

 puts disks together to create a

Larger storage capacity.

raID 0 and raID linear

 is faster than using one disk as

parts of the data is stored on both disks. This option is not
as secure as 

raID 1 

as if one disk failsAll data is lost.

advanced definition of raid 1
raID 1

 provides mirroring over both disks, with

the same read/write speed of a single disk.
A 

raID 1

 array can only be as large as it’s

smallest member disk.
Because the data is stored on both disks,

raID 1

 provides fault tolerance and protection,

in addition to performance advantages

Simple definition of raid 1
raID 1

 makes an identical copy of the data from disk 1 to

disk 2 so the same data is stored on both disks, this makes
this option more secure as if one disk fails, the other one is still operational. The failed disk can be 
changed to a new disk and 

raID 1

 can be enabled on the new disk and the 

raID 1

 mirror

copy is redone and the data is secure again.

Summary of Contents for P50696




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands