Operation
13
Activating / deactivating the laminator
1. Move the ON / OFF switch
3
to “
ON” (―) to switch the laminator on.
The ready indicator
1
will turn from black to red once the
laminator has reached the correct temperature for lamination.
The preheating time may vary depending on the ambient
tempera ture and air humidity.
2. Move the ON / OFF switch to “
OFF” ( ) to switch the laminator off.
Operation
WARNING!
Risk of injury!
Handling the laminator improperly may result in injury.
− If an object (sleeves, tie etc.) is unintentionally taken into
the laminating pouch infeed slot, immediately disconnect
the power plug.
NOTICE!
Risk of damage!
Improper handling of the laminator may lead to damage to the
laminator or documents.
− Do not in any case laminate documents with a treated
surface (e.g. fax or thermopaper, Polaroid pictures etc.)
and papers with surfaces that may be altered through
heat (tickets, ultrasonic scans etc.).
− Only use one laminating pouch per lamination, as
laminating pouches may stick tightly together.
− Do not leave any laminating pouches in or next to the
laminator after lamination.
When using the laminator, a slight odour may be produced.
Ensure there is sufficient ventilation in the room, e.g. by opening
windows.
