Nest swing
Instruction manual
GB
IRL
10
CUSTOMER SERVICE
00800 78747874
IRL
IRL
GB
GB
430012
69_BD
A_Aldi_UK
-IRE_Nestschauk
el_2018_060318
NOTE!
Maintenance of the swing
Before each use of the swing, the supervisor should carry out the following
tasks and repeat them at least once a month:
Clamp the tubes, check the swing seats, chains, ropes and other accessories for
signs of wear and tear; defective parts must be replaced in accordance with the
manufacturer's instructions.
Check all protective devices for completeness and damage. Check all moving
parts, and replace them if necessary. Small parts can be found in any hardware
store or handicraft shop. Check metal parts for rust, only apply lead-free paint
acc. to EN 71 requirements. If this swing is mounted on a frame with several
swing elements, absolutely check all the parts. If the swing is hung on a branch,
please check it for the proper load bearing characteristics. Check the substrate
to see whether it is able to provide a cushioning in case of a fall. At the end of
the gardening season, at the latest at temperatures below 4°C, remove the
swing and store it in a dry and frost-free place. Only use original spare parts
from Flexxtrade GmbH & Co. KG, since other ropes, tubes, and seating surfaces
do not fit on the nest swing, and could therefore entail safety hazards.
Technical data:
Model: FLX-NS-01N, Ø 110 cm, max. load capacity 150 kg
Disposal
Disposal of packaging
Dispose of the packaging sorted by type. Dispose of cardboard and other re-
lated substances in the
waste paper collection, and foils in the recyclable waste collection.
Declaration of Conformity:
The manufacturer Flexxtrade GmbH & Co. KG hereby declares that the nest
swing complies with the relevant Community harmonisation legislation:
Directive 2009/48/EC on the Safety of Toys
Applied harmonised standards or specifications /
EN 71-1:2011+A3:2014, EN 71-2:2011+A1:2014, EN 71-3:2013, EN 71-8
Aldi Nord item number: 1288
430012
69_BD
A_Aldi_UK
-IRE_Nestschauk
el_2018_060318
