Maintenance
After SAleS Support
GB IRE
GB
+44 151 649 1500
IRE
+44 1890 946 244
18
NOTICE!
Risk of damage!
Improper handling of the hedge trimmer may result in damage.
− Do not use any aggressive cleaners, brushes with metal or nylon
bristles, as well as sharp or metallic cleaning utensils, such
as knives, hard scrapers and the like. They could damage the
surfaces.
− Never spray the hedge trimmer with a water jet or a
high-pressure cleaner. There may be significant damage if
water enters the motor.
Thoroughly clean the hedge trimmer immediately after each use and let all components
dry. Moist plant cuttings may otherwise harden or start to rot; they are then much
harder to remove.
1. Keep the protective devices, air vents and the motor housing as free of dust and
dirt as possible.
2. Remove all plant cuttings with a hand brush or brush.
3. Clean all smooth surfaces with a damp cloth.
Finally, thinly coat the blade
4
with oil and briefly run the hedge trimmer to distrib-
ute the oil (see
fig. G
).
Maintenance
• There are no parts within the device that need to be maintained.
• Regularly check that all screw connections are tight to ensure the hedge trimmer
will operate safely.
• Damaged or worn double cutters must no longer be used and you must replace
them with the manufacturer's genuine spare parts.
• Have any safety-relevant maintenance work – such as replacing faulty components
or sharpening or replacing the double cutter – carried out by a specialist or our
service department to maintain the hedge trimmer's operational safety.