1. Make 2-3 fluid ounces of leak detecting solution by mixing one part washing up
liquid with 3 parts water.
2. Ensure the control valve is "OFF".
3. Connect the regulator to the cylinder and ON/OFF valve to the burner, ensure the
connections are secure then turn ON the gas.
4. Brush the soapy solution on to the hose and all joints. If bubbles appear you
have a leak, which must be rectified before use.
5. Retest after fixing the fault. Turn OFF the gas at the cylinder after testing.
6. If detected leakage cannot be rectified, do not attempt to cure leakage but
consult your gas dealer.
Lighting your barbecue
Integrated ignition
WARNING!
Risk of a sting flame or explosion of unignited gas/air
mixture!
The resident gas/air mixture of a previously failed ignition can be
ignited and can lead to a sting flame or explosion.
- If any burner fails to ignite, turn the control knob off
(clockwise) and also turn the cylinder valve off. Wait five
minutes before attempting to relight with ignition sequence.
Igniting the burners using the integrated igniter
1. Open the lid of the gas barbecue and leave it open while igniting.
2. Connect the gas canister to the barbecue according to the instructions supplied
with the regulator.
3. Turn all control knobs to the "OFF" position.
4. Turn on the gas supply at the canister or the regulator switch, depending on the
regulator connection type and in accordance with the user manual. Use soapy
water to check for leaks in the connection between the gas canister and
regulator, and in the inlet from hose to barbecue hose. If there is a leak, bubbles
will form at the affected area. Do not use the barbecue if you discover a leak.
Contact your gas or barbecue supplier.
5. To ignite a burner, push in the associated control knob, then turn it 90° counter-
clockwise while it is pushed in (maximum position). You will hear a distinct
Use
34