Use
17
Adjusting the saw alignment
The front part of the product can be turned 90
°
to the left or right. This allows you to
saw in a sideways direction.
1. Make sure that the product is disconnected from the mains.
3
16
8
16
Front part
2. Pull the lock slide
8
in the direction
of the arrow and hold it in this position
(see
Fig. 3
).
3. Turn the front part
16
of the product
to the desired position.
4. Release the lock release slider to lock
the front part of the product in the set
position.
The saw alignment is now set.
Adjusting the stroke rate limit
The product has a stroke rate limit of 500–2800 rpm
-1
. The stroke rate of the product
can be increased continuously during operation by pressing the on/off switch
11
repeatedly. You can use the adjustment wheel
9
to limit the maximum number of
strokes so you do not accidentally increase the number of strokes during operation to
such a high number that the respective workpiece is damaged.
4
9
− To increase the stroke rate limit, turn
the adjustment wheel
9
towards
the “
+
” position (see
Fig. 4
).
− To decrease the stroke rate limit, turn
the adjustment wheel towards the
“
-
” position.
The suitable stroke rate depends on the material which is being
processed.
