AFTER SALES SUPPORT
13
1300 855 831
MODEL: AB1900 PRODUCT CODE: 61755 08/2018
AUS
AB1900
Safety regulations
manual in a safe place, so that the information is available at all times. If you give
the equipment to any other person, give them these operating instructions as well.
We accept no liability for damage or accidents which arise due to non-observance of
these instructions and the safety information.
WORKING HINTS
• All protective and safety devices must be mounted on the machine before
beginning work.
• The machine is designed to be operated by one person. The operator is
responsible for all other persons in the working area.
• Observe all safety instructions and warnings attached to the machine.
• See to it that safety instructions and warnings attached to the machine are always
complete and perfectly legible.
• The safety, work and maintenance instructions of the manufacturer as well as the
technical data given in the calibrations and dimensions must be adhered to.
• Relevant accident prevention regulations and other, generally recognized
safety-technical rules must also be adhered to. The machine may only be used,
maintained, and operated by persons familiar with it and instructed in its operation
and procedures. Arbitrary alterations to the machine release the manufacturer
from all responsibility for any resulting damages. The machine may only be used
with original accessories and original tools made by the manufacturer.
• Any other use exceeds authorization. The manufacturer is not responsible for any
damages resulting from unauthorized use; risk is the sole responsibility of the
operator.
•
Caution: The use of other tools or accessories than the ones specified in the
operating instructions may present a risk of injury for you.
Residual risks
The machine has been built according to the state of the art and the
recognised technical safety requirements. However, individual residual
risks can arise during operation.
Mechanical hazards related to:
Machine parts or workpieces:
•
shape;
•
relative location;
•
mass and velocity (kinetic energy of elements in controlled or uncontrolled
motion);
•
mechanical strength;
•
Crushing hazard;
•
Cutting or severing hazard;
•
Entanglement hazard;
•
Drawing-in or trapping hazard;
