19
GB
Changing the cover
Depending on the level of
wear and tear, it can be help-
ful to replace the cover. New
covers can be ordered from
your retailer.
1. Take the protective cap
17
off of the lock screw
18
(see
figure
Q
).
2. Loosen the lock screw
18
with a Philips-head screw-
driver (see figure
Q
).
3. Pull the top layer of the
cover
19
off (hook and
loop fastener). Pull the bot-
tom layer off as well.
4. Slide the cover
19
on the
pockets
20
off the brac-
es
21
(see figure
S
).
5. Screw the shade tip
22
off
and remove the cover
19
(see figure
S
).
6. Pull a new cover over
by reversing the steps.
Care + storage
Cleaning the cover
Please note!
– The cover is not suitable
for machine washing!
– Do not use a tumble-dryer.
– Do not iron.
– Do not use aggressive
chemical cleaning agents
or fluids, solvents, abra-
sive substances or ob-
jects, bleaching agents,
high-pressure cleaners or
strong cleaning products.
– Comply with the manufac-
turer’s dosing, application
and reaction instructions.
• Hand wash the cover at
40 °C.
To clean the cover, it is
best to use a soft brush
and a small amount of a
soapy solution.
Maintaining the shade
pole
• Clean the shade pole reg-
ularly to ensure that the
mobile parts slide prop-
erly. If necessary, spray it
with a silicon or Teflon lu-
bricant spray.
• Check all load-bearing
parts such as braces,
screws etc. regularly.
• Check the shade pole reg-
ularly for rust spots and
touch them up if neces-
sary. Use only a small
196967 20201015.indd 19
196967 20201015.indd 19
16.10.2020 09:10:54
16.10.2020 09:10:54