For all servicing needs, please contact CUSTOMER SERVICE on:
FREECALL: 1800 800 919 PHONE: 08 6217 0600 FAX: 08 6217 0699 EMAIL: [email protected]
www.aldertapware.com.au www.vitobertoni.com.au
V04 190406
Divertor Cartridge
INSTALLATION: LYNX DUAL SHOWER ELITE ROUND
Diagram # 1 - Install G1/2 male threaded shower outlet at recommended height of 1900mm above the floor of the shower
recess. The resultant height of the RAIN SHOWER is 2200mm
Diagram #2 - FULLY unscrew top grub screw from diverter and remove top connector piece (avoid damage to O-rings).
Apply thread tape to the G1/2 male thread then screws on the top connector piece
Diagram #3 - Attach the bottom cover plate to the wall using screw / plastic plug supplied. Cover plate to be vertically in
line with top connector piece. Grub screw hole in 6 o’clock position. Vertical distance between top and bottom
connections is variable
– maximum 620mm
Diagram #4
– Screw on bottom rail to the underside of the diverter – no thread tape
required
Diagram #5 - Make sure that the grub screws are wound out. Push the diverter over
the top connector piece and the bottom post into the cover plate.
Diagram #6 - Screw in top and bottom grub screws to secure the rail in place
Screw the RAIN SHOWER onto the top arm and attach shower hose to bottom of rail.
Ensure that black sealing washers are in place
