Range
Set the range of test results which for the colour of the light after test. Default setting is >= 0.080% for
Red and >=0.020% for Yellow.
⚫
authorization in advanced setting is required
Date / Time
Set date and time. Date and time can also be automatically adjusted when the device is connecting to
the Smartphone App
“
Alcovisor Elite
”
.
⚫
Authorization in advanced setting is required
⚫
Date and time will be adjusted automatically when the device is connected with Android/iPhone
mobile APP “
Alcovisor Elite
”
by Bluetooth.
Calibration and Setting
Calibration and Setting are protected by passwords and can only be operated by trained operator.
Operating Instruction (With APP)
The Android and IOS
mobile APP “Alcovisor Elite” can be used with Mars
, compatible with Android version
4.3+ and IOS 9.0+, and the internal bluetooth module of the mobile is 4.0+
Switch on the device, and open the
App “Alcovisor Elite”. Both Bluetooth signal and connection signal is
shown when it is successfully connected with the App.
1.
Once the device is connected with the App, the device will be controlled by the App, all buttons on the
screen will be disabled.
2.
Attach a mouthpiece onto the sample port. Always use a mouthpiece instead of using a sampling
cup for accurate test results.
3.
Press “Tap to begin”
on the mobile phone screen to start the test. The serial number of the device
will be shown on the device screen.
4.
Face the mobile phone camera, make sure the face and serial number is clearly shown on the mobile
phone screen.
5.
Take a deep breath and blow until BEEP tone stops.
6.
Test result will be shown on both the device and the App.
