17
August 18, 2020
Q-SYS CONFIGURATION AND PLUGINS
V-Com communicates with a Q-Sys system to enable ring zones, configure party lines, etc. This is accomplished
using both the V-Com Intercom Matrix plugin along with the V-Com Intercom Station plugin.
The V-Com Intercom Station plugin is used to configure all of the properties of a specific station, which are then
transferred to the physical station when it is “Linked” to the Q-Sys Core.
The V-Com Intercom Matrix plugin is a logical block that lives within Q-Sys that is used to configure all party lines
and ring zones. All party lines and zones can be given descriptive names so that each intercom station can be
assigned to these groups. Once the system is active, the Intercom Matrix plugin properly routes audio from each
station to the appropriate party line while also managing all ring zone control.
Note: All Dante devices use PTP for clock synchronization and require Q-Sys core's PTP config to
be set to domain 0. IEEE 1588 Priority 1 is set to 249 and Priority 2 is set to 112 for BMC purposes.
PTP information (domain, priorities, etc) are not configurable in the units.
