Page 44
March 23, 2012 • Alcorn McBride 8TraXX/E User’s Manual • Rev 2.6
Control Commands
These commands control some of the operational modes of the 8TraXX/E. Other operational modes and unit
configuration can be accomplished by using the LCD menu system on the front panel.
Keylock Enable
Description:
This command is used to disable the front panel buttons of the 8TraXX/E.
Command Bytes:
B<n>KL
Parameters:
<
n>
is 0 to disable buttons, 1 to enable buttons.
Message Response:
R
Examples:
Lock front panel buttons.
B1KL
LCD PIN Enable
Description:
This command is used to enable or disable the LCD PIN number lock. When
enabled, a 4-Digit PIN number is required to access the front panel menu.
Command Bytes:
L<n>KL
Parameters:
<
n>
is 0 to disable PIN, 1 to enable PIN.
Message Response:
R
Examples:
Enable LCD PIN lock.
L1KL
LCD PIN Set
Description:
This command is used to set the 4-digit PIN number that is required to unlock the
front panel LCD menu, when enabled.
Command Bytes:
S<n>KL
Parameters:
<
n>
is a 4 digit PIN.
Message Response:
R
Examples:
Set PIN to 1234.
S1234KL