Alcorn Mcbride 1756-Show I/O, User Manual, Page: 2 / 33

Document Revision 1.0
October 2003
Copyright

2003 Alcorn McBride, Inc. All rights reserved.
Every effort has been made to assure the accuracy of the information contained
in this manual, and the reliability of the hardware and software. Errors
sometimes can go undetected, however. If you find one, please bring it to our
attention so that we can correct it for others.
Alcorn McBride Inc. reserves the right to make changes to these products,
without notice, in order to improve their design or performance.
Applications described herein are for illustrative purposes only. Alcorn McBride
Inc. assumes no responsibility or liability for the use of any of these products,
and makes no representation or warranty that the use of these products for
specific applications will be suitable without further testing or modification.
Our Show Control equipment is not intended for use in applications where a
malfunction can reasonably be expected to result in personal injury or damage to
equipment. Customers using or selling Alcorn McBride Inc. products for use in
such applications do so at their own risk, and agree to fully indemnify Alcorn
McBride Inc. for any damages resulting from such improper use or sale.
The 1756-Show I/O incorporates technology which is licensed from Allen-
Bradley Company, Inc. Allen-Bradley has not technically approved, nor does it
warrant or support the 1756-Show I/O. All warranty and support for the 1756-
Show I/O and its application is provided solely by Alcorn McBride.
ControlLogix and RS-Logix5000 are trademarks of Allen-Bradley/Rockwell
Automation, Inc.
Product Design: Jeremy Scheinberg, Jim Janninck.
Documentation: Jeremy Scheinberg, Jim Janninck
Alcorn McBride Inc.
3300 S. Hiawassee, Suite 105
Orlando, Florida 32835
(407) 296-5800
FAX: (407) 296-5801
http://www.alcorn.com
info@alcorn.com