© ALCOR-SYSTEM
3
1
CSSMS installation
The system is made of two parts, a control box and a sensor mounted to a ball support that allows any
orientations. The sensor cannot be detached from the control box, and in located 50 cm apart.
Fig. 1
Complete system without cables to computer and power supply, left main control box and right the sensor
made of photodiode and green filter.
The system works outdoor, it is weather-tight and can withstand wind, rain and snow. it will prevent all
intrusion of insects, even the smallest one. Nevertheless, the system is not submersible into water.
The base plate to attach the box and the sensor is not provided.
1.1
Control Box installation
The box has two fixing brackets on the side which allows to fix the system on a wall or other robust surface.
It is also possible to fix it on a vertical surface, in that case have the 2 connectors downward. Bracket hole
diameter are 6mm or ¼ ’’. Attachment screws are not provided because their types are defined accordingly
to the material where the box will be located.