background image

 

Rigging manual LR18i  Rev. 1.1 

15 

6. Service and support ___________________________________________   

 
 

Warranty 

 
Summary 
 

Alcons Audio BV warrants the original purchaser and any subsequent owner of each new Alcons product, for a period of six years limited from the date of the 
original purchase by the original purchaser that the new Alcons product is free of defects in materials and workmanship. Alcons Audio BV warrants the new 
Alcons product regardless of the reason for failure, except as excluded in this warranty. In order to obtain warranty, you must keep the original sales receipt to 
establish the exact date of purchase. 
 

Items excluded from warranty 
 

Warranty does not cover any product which has been damaged because of any misuse, accident, or negligence. Warranty also does not extend to a new Alcons 
product if the serial number has been defaced, altered or removed. 
 

What we will do 

 
Alcons Audio BV will replace defective parts and repair malfunctioning products, regardless of the reason for failure (except as excluded). Warranty work can 
only be performed at our authorized service centres, or at our factory. 
 

Disclaimer 
 

Alcons Audio BV is not liable for any damage to loudspeakers, amplifiers, or any other equipment that is caused by negligence, misuse or improper installation. 
Alcons Audio BV is not liable for any incidental damages resulting from any defect in the new Alcons product. This includes any damage to another product or 
products resulting from such a defect. 
 
 
Alcons Audio BV reserves the right to change specifications without notice. 

 

Summary of Contents for LR18/120i



















Reviews: