ALCON AOU-2410, User Manual

Page: 22 / 33

http://www.alcon.tw
22
Config Methods
– Correspond to the methods that AP supports as an
Enrollee for adding external Registrars (a bitwise or of values).
Value Hardware Interface
0x0001 USBA (Flash Drive)
0x0002 Ethernet
0x0004 Label
0x0008 Display
0x0010 External NFC Token
0x0020 Integrated NFC Token
0x0040 NFC Interface
0x0080 Push Button
0x0100 Keypad
Device Password ID
–Indicate the method or identifies the specific
password that the selected Registrar intends to use. AP in PBC mode
must indicate 0x0004 with two minute Walk Time.
Value Description
0x0000 Default(PIN)
0x0001 User-specified
0x0002 Rekey
0x0003 Display
0x0004 Push Button (PBC)
0x0005 Registrar-specified
0x0006
~
0x000F
Integrated NFC Token
Selected Registrar
–Indicate if the user has recently activated a
Registrar to add an Enrollee. The values are TRUE and FALSE .
State
–The current configuration state on AP. The values are
Unconfigured and Configured .
Version
–WPS specified version.
AP Setup Locked
–Indicate if AP has entered a setup locked state.
UUID-E
–The universally unique identifier (UUID) element generated by
the Enrollee. There is a value. It is 16 bytes.
RF Bands
–Indicate all RF bands available on the AP. A dual-band AP
must provide it. The values are 2.4GHz and 5GHz