manualshive.com logo in svg

ALCON ALink-5801a, User Manual

Share
Download
ALCON ALink-5801a User Manual Download Page 9

 

 ALink-5801a

 Wireless LAN Outdoor Bridge

 

                                  ALCON Telecommunications Co., Ltd.   

9 

 

DISCLAIMER 

 

The ALCON ALink-5801a Wireless LAN Outdoor Bridge User Manual 

 

Document No.: 50-5000(REV: 3.2a), April. 10, 2005. 

COPYRIGHT © 2005 ALCON Telecommunications Co., Ltd. 

ALL RIGHTS RESERVED 

 

Any part of this publication could not be copied, stored in a retrieval system, or translated into 
any language or computer language in any form or any means, electronic, magnetic, chemical, 
manual or otherwise, without the prior written permission of ALCON Telecommunications Co., 
Ltd. (ALCON). 2F, No.480-5,Sec.6, Yen-Ping N. Road Shih-Lin, Taipei, Taiwan, 111 

 

 

The ALCON ALink-5801a is a registered trademark of ALCON Telecommunications Co., 
Ltd. 

 

Printed in the Taiwan 

The instructions in this manual have been carefully checked for accuracy and are presumed to 
be reliable.    The accuracy and adequacy of this document are the responsibilities of ALCON 
Telecommunications Co., Ltd. Please, give us any comments or corrections to ALCON 
Telecommunications Co., Ltd. 

Summary of Contents for ALink-5801a





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands