manualshive.com logo in svg

ALCON ACP24, User Manual, Page: 12 / 46

Share
Download
ALCON ACP24 User Manual Download Page 12

 

12

In 

Wireless 

page, 

each option is described below

 

 

Wireless Network -   

 

Wireless Network page allows you to configure the 

Wireless Mode

, 

Channel / 

Frequency

, 

SSID

 and 

Security

 etc. 

 



Wireless Mode –

 Default setting is 

802.11g/n HT20

. This will support all 

802.11g clients connect to the AP. You can choose 

802.11g 

in wireless 

mode column if your environment only has 802.11g clients. 



Channel / Frequency –

The channels available are based on the country’s 

regulation and select the appropriate channel from the list provided to 

correspond with your network settings. 



Current Profiles –

 You may configure up to four different wireless profiles. 

Click 

Edit

 to modify the profile and check the 

Enable

 box to activate the 

profile.

 



Profile (SSID) Isolation – 

Stations connected to different profiles cannot 

access each other. Choose 

No Isolation

 (Full access), or 

Isolate all 

profiles (SSIDs) from each other using VLAN (802.1Q) standard

.

 



SSID Profile –

 The SSID is the unique name shared among all points in a 

wireless network. The SSID must be identical for all points in the wireless 

network. It is case-sensitive and must not exceed 32 alphanumeric 

characters, which may be any keyboard character. Make sure this setting 

is the same for all points in your wireless network. For added security, you 

should change the SSID from the default name 

Generic

, to a unique 

name. 



VLAN ID –

 If you have enabled VLAN tagging on your network, specify the 

VLAN tag ID 1 to 4095. You can assign an SSID to a VLAN. Client devices 

using the SSID are grouped in that VLAN. 



Suppressed SSID –

 This option can hide the SSID not available from site 

survey tool. Enable this function only if you do not want the Access Point 

to be found by others. 



Stations Separation –

 Default setting is 

Disable

. This option can disallow 

the client devices connected to this AP to access each other. 



Security Mode

: By default, the security is 

Disabled

. Refer to the next 

section to configure the security features such as 

WEP

, 

WPA-PSK

, 

WPA2-PSK

, 

WPA-PSK Mixed

, 

WPA

, 

WPA2

 and 

WPA-Mixed

. 

 

Summary of Contents for ACP24















































Reviews:

No comments