MIMO 2x2 Wireless Outdoor Access Point System User Manual R2
34
4.
Configure 5GHz Bridge
4.1
Bridge Configuration
This page can be accessed by clicking
5GHz Bridge
>
Setting
.
1)
Bridge Mode
By default, it is in
Slave
. When
Master
is selected, the remote bridge mode shall set as Slave mode.
One bridge network shall have only one outdoor unit in Master mode, and the others in Slave mode.
2)
Remote Bridge Setup
In order to establish the wireless link between Bridge Radios, the MAC address of remote Bridge(s)
needs to be registered in the address filed. Enter the MAC address with format as xx:xx:xx:xx:xx:xx (x
is the hexadecimal digit). Master Bridge Radio may accommodate up to 8 remote MAC addresses by
the current firmware. In addition, Slave Bridge Radio supports only 1 MAC address which have to be
the Master Bridge