AlcoMate Prestige AL6000 Operator'S Manual Download Page 4

 

The AlcoMate Prestige AL6000 is intended to measure alcohol in human breath.  Readings obtained by this device 
are used in the diagnosis of alcohol intoxication.  The accuracy of this device has been established at a Blood 
Alcohol Concentration of 0.008 and 0.032.  Accuracy at a Blood Alcohol Concentration greater than 0.032 has not 
been evaluated.  Accuracy testing was completed according to DOT regulations.

   

 

- Device Setup and Operation - 

If you are using the Prestige for the first time, please install two 1.5V AA batteries (included) and attach 
a mouthpiece (included) to the unit.   

1. 

Instructions

 

a)

 

Press and hold the Power Switch to turn the unit on.  

The cumulative test count will be 

displayed as you hold the Power Switch down.

  You can use the cumulative test count to see 

when you should recalibrate the alcohol sensor (every 200 tests or at least once yearly). 

b)

 

Release the Power Switch.  There will be a countdown from 

 to 

 as the unit warms up.   

c)

 

Secure your lips around the mouthpiece and blow sharply and steadily into the unit for about 4 
seconds.  You will hear two beeps when the device is done taking the breath sample.  Your will 

see the digit 

 moving left to right in the display as the device analyzes the sample.   

d)

 

When analysis is complete, you will see the blood alcohol concentration (BAC) results displayed. 

e)

 

The results will be shown for about 15 seconds.  The unit will then shut itself off. 

f)

 

If the device cannot take a successful sample, you will see 

 in the display and the unit will 

shut itself off. 

 

2.  

Understanding Your Results (BAC Reading)

 

 

 

 

* Drinking alcohol in ANY amount may impair the ability to drive.  There is no "safe" level of 

 

   alcohol intake before driving.  Don't drink and drive. 

 
Note:  The maximum reading the device can show is 0.40%.  A true BAC of 0.40% or above may result in 
the onset of coma or even death by respiratory arrest.  A reading of 0.40% may indicate an acutely 
dangerous condition, but may also indicate a sampling error (such as liquid alcohol blown into the 
device).  Please carefully read the 

Warning section

 of this manual before operating the device. 

 
 

Your Reading 

Your Range 

Description 

0.00% to 0.01% 

Safe* range 

Little/no alcohol intake. 

0.02% to 0.04% 

Moderate* range 

Increased alcohol intake. 

0.05% and over 

Warning* range 

Ability to drive may be impaired. 

Reviews: