n
Auto Answer
With this feature, you can answer a call by
just picking up the handset from the base
without pressing any key.
1. Press the
key.
3. Use
to choose
,
then press the
key.
4. Use
to choose
/
to
enable/ disable the function, then press the
key, you will hear a confirm beep.
AUTO ANSWER
ON OFF
or
key
or
key
2. Press
or
key repeatedly to choose
, press the
key.
HS SETTING
MENU/R
MENU/R
MENU/R
MENU/R
n
Paging
n
Dial Mode
To stop paging, press the
key on the base again
or any key on the handset.
You can page the handset from the base unit
making it ring with a special tone. It's useful to
locate a lost handset.
Press the
key on the bottom of the base (less
than 5 seconds), all the handsets registered to
the base will ring for about 60 seconds.
You can select to change the dial mode by the
following steps:
1. Press the
key.
2. Press
or
key repeatedly to choose
, and press the
key.
3. Press the
key to choose the
,
then press the
key.
BS
SETTING
DIAL MODE
4. You can press
to select the
required dial mode options (
/
) and
press the
key. A confirm beep will be heard.
TONE PULSE
or
key
Note
:
If you are not sure which dialing mode should
be selected, please contact your local service
provider.
Note
Registration
:
On a long
key press, more than or equal to
5 seconds, the base will enter subscription
mode. For details, see par.
.
MENU/R
MENU/R
MENU/R
MENU/R
D u r i n g
a
c a l l ,
y o u
m a y
t u r n
o n
t h e
speakerphone built in the handset. In this
mode you can simply put your handset on a
surface (e.g. a desk) and enjoy the comfort
of the handsfree conversation.
, press the
during a call (line engaged). The
icon
appears on the LCD.
To turn the feature on
key
To turn the feature off, and keep on talking in
normal mode, press the
key again. The
icon will disappear.
n
Handsfree
Notes
Adjusting Audio Volume
:
Before putting the handset near your ears, be
sure you have turned the speakerphone off.
To adjust the speakerphone volume, see par.
.
When the line is engaged, pressing the
key
sends the Flash signal. This key is used in
conjunction
with
special
services
(e.g.
call
waiting) which can be available in your phone
network. For further details please contact your
network telephone company.
n
Flash Signal
To use the said special services, just press the
key while the line is engaged: the display will show
.
R
MENU/R
MENU/R
Advanced Functions
n
Menu Map
1. CID BOOK
2. PHONE BOOK
3. BS SETTING
ADD ENTRY
CHANGE ENTRY
DELETE ENTRY
DELETE ALL
PB STATUS
TERMINATE HS
DIAL MODE
FLASH TIME
MODIFY PIN
BS DEFAULT
4. HS SETTING
5. REGISTER
ALARM
AUDIO SETUP
RING SETUP
TONE S
LANGUAGE
HS LABEL
AUTO ANSWER
DATE & TIME
SELECT BS
HS DEFAULT
ETUP
n
Phone Book
The phonebook built in your cordless phone allows you to store frequently used numbers so that you can
easily make a call without having to remember or enter the phone number.
Character Map
To enter a specific alphanumeric character, press one or more times the relevant key for the required
character according to the following table: once for the first character, twice for the second and so on.
Key
Characters in the displayed order
0
1
2
3
4
5
6
7
8
9
(spc)
0
&
/
.
1
@
_
A
b
C
2
d
E
F
3
G
H
I
4
J
K
L
5
M
N
O
6
P
q
R
S
7
T
U
V
8
W
X
y
Z
9
_
Adding the Phone book Entries
PHONE BOOK
ADD ENTRY
NAME ?
NUMBER ?
3. Press
key again to choose
.
4. The display shows "
". Enter the name
you want to use, then press the
key to
confirm. The display shows "
".
Enter the desired number (up to 20 digits),
press the
key.
5.*Use
to select the ring you like to
associate with the number, press the
key
to confirm.
1. Press the
key.
2. Press the
to choose
,
press the
key.
key
or
key
Note:
If you make a mistake while entering a
number, use the
key to correct it. Each
time you press the key, the last digit is
deleted. To clear all digits, press and hold the
key.
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
Viewing the Phone book Entries
1. In the standby mode, press the
key.
2. Press
repeatedly until the desired
name is displayed.
3. Press the
key to show the relevant number.
or
key
MENU/R
6. Repeat if necessary.
* If you want to set a VIP number, you should
select a special ring tone for it. The ring tone
should be different from the external ring you
have set. You can set up to 9 VIP ring tones
associate with 9 VIP numbers/groups.
Deleting the Phone book Entries
PHONE BOOK
DELETE ENTRY
CONFIRM ?
DELETE ALL
CONFIRM ?
3. Press
to choose
.
Press the
key.
4. Press
repeatedly until the name
you want to delete displays, then press the
key. The display shows "
". You can
press the
key to delete it or press the
key to exit.
5. At step 3, if you choose
menu and
press
the
key,
the
display
will
show
"
". You can press the
key to
delete all the entries or press the
key to
exit.
1. Press the
key.
2. Press the
to choose
,
press the
key.
key
or
key
or
key
Editing the Phone book Entries
PHONE BOOK
CHANGE ENTRY
3. Press the
to choose
menu, press the
key.
4. Press
repeatedly until the entry
you want to edit displays, press the
key to
confirm.
5. If necessary, press the
key to clear the
digit(s) then enter the desired name and
number, press the
key to save.
1. Press the
key.
2. Press the
to choose
,
press the
key.
key
key
or
key
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
Dialing a Number from Phone book
Find out the number you want to dial. Refer to
"Viewing the Phone book Entries". Then press the
key to dial out the number.
MENU/R
MENU/R
PB Status
The PB Status shows the number of phone book
entries already stored. When the
shows on the LCD, press the
key to enter it.
PB STATUS
MENU/R
MENU/R
MENU/R
n
BS Settings
Terminate HS
This function allows you to delete a handset
registration from the base.
3. Press the
key again to choose
. The display shows "
" to prompt you
to enter the PIN Code (The default PIN Code is
"0000"). Then press the
key.
4. Use the
to select a handset. If
you select the current handset or a non-
existent handset, a warning tone will be heard.
5. Press the
to confirm, and the selected
handset
will
behave
according
to
the
unregistered condition.
TERMINATE
HS
PIN?
key
1. Press the
key.
2. Press
or
key repeatedly to choose
menu, then press the
key.
or
key
BS
SETTING
Flash Time
You can select to change the Flash time by the
following steps:
1. Press the
key.
2. Press
or
key repeatedly to choose
menu, then press the
key.
3. Use
or
key to choose the
menu. Press the
key.
4. The display shows the current setting. Use the
or
key to select
/
, press
the
key.
BS
SETTING
FLASH TIME
SHORT LONG
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
1. Press the
key.
2. Press
or
key repeatedly to choose
menu, then press the
key.
or
key
BS
SETTING
3. Use
to choose
menu, press the
key.
5. Enter the new PIN, press the
key. You will
be requested to confirm the PIN code. Enter
the new PIN again then press the
key to
confirm and exit.
MODIFY PIN
MODIFY
4. The display shows "
" to prompt you to
enter the old PIN. If the old PIN code is
validated, you will be prompted to enter a new
PIN code. If the old PIN is not validated, a
warning beep will sound and you will be
returned to the
menu.
PIN?
PIN
BS Reset
This function allows you to reset the Base
setting to the factory default.
1. Press the
key.
2. Press
or
key repeatedly to choose
menu, then press the
key.
or
key
BS
SETTING
3. Press
to choose
,
press the
key. You will be prompted to enter
the PIN code.
4. Enter the PIN code (the default PIN is 0000),
then press the
key. If the PIN code is
validated all Base settings will be returned
to
the
factory
default,
otherwise
the
settings will remain.
After resetting, the handset will return
to standby mode.
BS DEFAULT
Result:
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
6. Use
to select the ring you like to
associate with the number, press the
key to
confirm.
or
key
MENU/R
Modify PIN
This function allows you to change the PIN
number of the currently active Base. The default
PIN is 0000.
n
HS Settings
Setting Alarm
1. Press the
key.
2. Press
or
key repeatedly to choose
menu, then press the
key.
HS
SETTING
You are able to set the alarm on the handset
and adjust the alarm settings.
3. Press the
key again to choose
.
4. The display shows the current set. Use the
or
key to select
/
, press the
key.
5. If you select
, the display indicates you
to enter the time in
:
format.
ALARM
ON OFF
ON
HH MM
6. Press the
key, a beep sounds and the
display shows
you can
press
to enable or disable the
snooze function on the alarm and press
the
key.
7. When the alarm sounds, press any key to
switch it off.
SNOOZE ON/OFF,
or
key
Notes
SNOOZE ON
:
At step 5 you need to enter the time in
24-Hour format.
If you press any key at the right time the
alarm to ring, the alarm will be silent.
If you choose
, the alarm will
ring at regular intervals of 10 minutes.
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
Key Tone
Every time you press a key, your handset
acknowledges it with a key tone. You can
disable the key tones for a silent use. In certain
error conditions, a warning tone will sound
when an incorrect key is pressed.
3. Use
to choose
menu, press the
key.
4. Press the
key again to choose
.
5. You can use
to choose
or
to enable or disable the function.
6. Press the
key.
TONE SETUP
KEY TONE
ON
OFF
1. Press the
key.
2. Press
or
key repeatedly to choose
menu, then press the
key.
or
key
or
key
HS
SETTING
2. Press
or
key repeatedly to choose
menu, then press the
key.
3. Press the
key to choose
,
press the
key.
4. Use
or
key to choose
or
, press
key.
5. The display shows the current setting. Use the
or
key to choose the volume level
(VOLUME 1-VOLUME 5), press the
key.
HS
SETTING
AUDIO SETUP
SPEAKER VOL
EARPIECE V
Note
:
For normal use, we recommend you
leave the key tone enabled. This makes
the phone easier to use.
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
Audio Setup
You can also use the menu to adjust the audio
volume.
1. Press the
key.
MENU/R
2. Setting date & time
1. Press the
key.
2. Press
or
key repeatedly to choose
menu, then press the
key.
3. Press
or
key to choose
,
press the
key.
HS
SETTING
DATE & TIME
1. Date Format
1. Press the
key.
2. Press
or
key repeatedly to choose
menu, then press the
key.
3. Press
or
key to choose
,
press the
key.
4. Press the
key to choose
.
or
key
HS
SETTING
DATE & TIME
DATE FORM
5. You can use
to choose the Date
format (
/
), press the
key to
save.
DD-MM MM-DD
Note
:
At step 5 you need to enter the time in 24-
Hour format.
MENU/R
MENU/R
MENU/R
MENU/R
Setting Date & Time
MENU/R
MENU/R
MENU/R
4. Press
or
key to choose
or
menu, press the
key.
5. Enter the current date or time by numeric
keypad and press the
key to save and exit.
SET DATE
SET TIME
MENU/R
MENU/R
MENU/R
1. Press the
key.
2. Press
or
key repeatedly to choose
menu, then press the
key.
or
key
or
key
HS
SETTING
3. Press
to choose the
,
press the
key.
4. You can use
to select the base
you want, then press the
key. If you select
a non-existent base, the handset will sound a
warning tone.
5. The display will show
. Press the
key to confirm. A confirm tone will be
SELECT BS
SELECT BS X
MENU/R
MENU/R
MENU/R
heard.
HS Reset
This function allows you to reset the handset
settings to the factory default.
3. Press
to choose the
menu, press the
key. You will be prompted
to enter the PIN code.
4. Enter the PIN code (the default one is 0000),
then press the
key. If the PIN code is
validated all handset settings will return to the
factory default, otherwise a warning tone will
be heard and the settings will remain.
After resetting, the handset will return to
standby mode.
HS DEFAULT
Result:
1. Press the
key.
2. Press
or
key repeatedly to choose
menu, then press the
key.
or
key
HS
SETTING
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
Selecting a Base
This function allows you to select a base from
those already registered to the handset. You can
access the options by scrolling the menu.
n
Registration
The supplied handset is already registered with
the number 1.
3. Use
to scroll through the Base
names list, press the
key to choose a base
to your necessary. The handset will search for
the
requested
base
and
the
relevant
information will flash on the LCD.
You can register up to 5 handsets
to your base unit in order to share the same line
with other people.
Before registering a handset to the base, you
should press and hold the
key on the bottom
of the base for about 5 seconds then release it.
REGISTER
1. Press the
key.
2. Press
or
key repeatedly to choose
, then press the
key.
or
key
4. If the base is found, and the handset is
successfully registered, you will be prompted
to enter the PIN code (the default one is 0000).
On
validation
of
the
PIN
code,
the
Registration tone will sound and the Base
assigns a number to the handset. If the PIN
code entered is invalid, a warning tone will
sound, and the handset will return to the
previous registration state.
5. If the base is not found, the handset will
behave
according
to
the
Out
of
Range
condition.
MENU/R
MENU/R
MENU/R
n
Calling with more than one Handset
If you have more than one handset registered to
the same base, you can make internal calls and
transfer an external call between the registered
handsets.
1. Press the
key, the LCD displays as follows,
then enter the number of the handset you
want to call.
Making an internal call
2. If the handset entered is valid, the called
handset will ring and display
.
The handset user can press the
key to
answer the internal call.
3. At the end of your conversation, press the
key.
HSX CALLING
1. During an external call, press the
key then
enter the number of the handset you want to
transfer the call to.
2. If the called party can answer your call, he/she
can press the
key to talk with you. At this
time you can inform him/her of the incoming
call.
3. When the called handset answers, press the
key or replace the handset to the base to
complete the transfer.
Note
:
During the internal call, if an external call
comes in, the LCD will show the caller's
number. You should press the
key to end
the internal call first then press the
key
to answer the call.
1 2 3 4 5
Setting up a 3-way conference call
When you have both an external call and an
intercom call in progress, you can set up a three-
way conference call, like this:
1. During an external call, press the
key and
then the number of the handset you want to
join the 3-way call.
2. The called party press
key to answer.
3. The calling party can press the
key to start
the 3-way call.
4. Either of the two internal handsets can press
the
key to leave the conference call at any
time.
Note
:
If one of the handsets drops the conference
call, the remaining handsets will continue the
conference.
Call transfer between handsets
You can transfer an external call between the
handsets those are registered to the same base.
Feature List
1.8GHz DECT technology with GAP
Up to 5 handsets for optional for one base
Up to 4 bases for optional for one handset
Phonebook with up to 50 groups
9 VIP ring tones setting for phonebook
entries
Redial book with up to 10 entries
10 ring tones and volume selectable (5
off)
Internal call
Call transfer
3-way conference call
Receiver/Speaker volume adjustable (5
levels)
Mute
PIN protection
Predialing
Redial, Flash, Pause
TONE/PULSE dialing mode selectable
Wall mounting function
Key tone ON/OFF selectable
Full handsfree speakerphone
FLASH time selectable
Call duration display
Real time clock (set time)
Keypad lock
9 languages selectable
Auto answer ON/OFF selectable
Alarm clock include snooze option
Handset Name setting
LCD backlight
FSK and DTMF dual system Caller ID
Caller ID list with up to 40 entries
Incoming calls can be called back/added
to phonebook/deleted
Caller ID
Note
:
The caller ID feature is only available if you
subscribe to a Caller Display service from
your network provider.
Troubleshooting
Symptom
Check & Remedy
No operation
Check that the power adapter is properly connected.
Check that the telephone line cord is properly connected.
Check that the handset batteries in full power.
Check that the handset batteries are installed properly.
No dial tone
Check that the telephone line cord is properly connected.
Check that the power adapter is properly connected.
Nothing appears
on the display
Check that the handset batteries are installed properly.
Check that the handset batteries in full power.
Check that the handset is on.
Handset seems
to have very short
battery life
Caller s number
is not displayed
’
Check the charge contacts.
Consistently short battery life may indicate that replacement of the batteries is necessary.
Make sure the right batteries be used.
Make sure you have subscribed to a Caller ID service via your network provider.
The caller may have withheld their details.
Let the phone ring a couple of times as there may be a delay in receiving the Caller ID information.
DC 9V
DC 9V
If you subscribe to a DSL service
Please attach a noise filter (contact your DSL provider) to the telephone line between the
base unit and the telephone line jack in the event of the following:
- Noise is heard during conversations.
- Caller ID features do not function properly.
To single-line
telephone jack
Noise filter
To wall-mount your phone follow these steps:
a. Install the two self-tapping screws (not supplied) at a distance of 64mm from each other and located
on a horizontal line.
b. Place the phone onto the screw-heads and
slide down to secure.
Screw head
Wall Mounting
Wall
THIS PRODUCT IS SUITABLE FOR USE IN
THE PUBLIC ANALOGUE NETWORK (PSTN)
