ALcom AT9102, Instruction Manual

Page: 4 / 14

- 3 -
step.
�
The cursor of hour will blink, press UP
UP UP
UP or DOWN
DOWN DOWN
DOWN button
to adjust, press SET SET SET SET button to confirm and enter next
step.
�
The cursor of minute will blink, press UP
UP
UP UP or DOWN
DOWN
DOWN DOWN
button to adjust, press SET SET SET SET button to confirm, and then
finish the setting.
�
After you finish above setting, LCD will show the set
date and time and show the next available menu.
�
Press DEL
DEL
DEL DEL button to exit.
b) Set the local area code
(Not applicable for use in Singapore)
�
On-hook state, press SET SET SET SET button once, SEt
SEt
SEt SEt 1
1
1 1 dAtE
dAtE
dAtE dAtE
shows in the LCD, press UP
UP UP
UP button once,
SEt SEt SEt SEt 2 2 2 2 COdE COdE COdE COdE
will show in the LCD.
� Press SET SET SET SET button to confirm, COdE COdE COdE COdE ------ ------ ------ ------ will display,
and the first cursor
“ ““ “----“ ““ “
will blink
Note: The previous code will be shown if you had set before.
�
Press UP
UP UP
UP or DOWN
DOWN DOWN
DOWN button to adjust the number from 0
to 9.
� Press SET SET SET SET button to confirm and enter the second digit,
and so on. LCD will show the next available menu.
�
Press DEL DEL DEL DEL button to exit.