REF: Alcolizer HH4 Alcohol Tester User Manual V1
Page 7
© Alcolizer Technology
3.2
Turning On The Device
Turn the device on as follows:
•
Press either the Test Key or Up/ Down buttons. A company logo screen will appear
for a period of five seconds prior to the test screen displaying. The logo screen can
be terminated sooner by pressing either the Test Key or Up/ Down buttons a second
time.
•
The Display will show
press to test
(Refer to Figure 3).
Figure 3 - Press To Test Message
3.3
Charging the Battery
Prior to initial use, the HH4 battery should be fully charged. The battery charge cycle may
take up to two hours.
Charge the battery as follows:
•
Connect the charger DC socket to the HH4 battery charging port (Refer to Figure 2)
•
Connect the AC or DC (vehicle) plug to a suitable power supply and switch on power.
The device will automatically start, and
Charging
will be displayed.
When the battery is fully charged, the battery condition indicator on the LCD Colour
Graphics Display will display five bars. (Refer to Figure 4 - Battery Condition Indicator)
Note
On specially configured devices, additional information may be displayed on start-up e.g.
Device serial number, Sample module serial number and days till calibration.
To permanently display this information, hold the Test key down for an extended period
upon start up.
CAUTION
The battery in the HH4 device is a Li-ION battery. As such it should not be tampered with
in anyway. Should any problems occur that are related to the battery, contact your local
Alcolizer representative for advice.
Only use the battery charger supplied with the Alcolizer certified equipment. Use of non
Alcolizer battery chargers could damage the device and render it inoperative.
