Alcohol Countermeasure Systems Alcolab Testpoint, Instruction Manual

Page: 8 / 12

ALCOLAB TESTPOINT 3
SETUP
1. Ensure the tablet is fully charged or plugged in. The power button is located on the
back, left-hand side of the device, under the rotating round cover. Press and hold
the power button for 5 seconds to turn on the device, the application will launch
automatically within a few minutes.
2. Input the provided registration key into the Registration Key field and tap
ACTIVATE.
3. Create and customize your Owner profile by following the on-screen prompts.
When completed, tap CREATE OWNER.
4. The following screen will indicate the Owner logged into the device and provide
several options. It is recommended to first setup Wi-Fi, e-mail and the app’s
language before proceeding to create users’ profiles (Administrator and/or
Operator). Scheduling events should be left until the end.
OPERATION
Once on site, plug the ALCOLAB testpoint into the AC/DC adaptor provided.
1. Click on the EVENTS tab, select the desired event from the list of scheduled
events, review the summary page and make necessary changes before
proceeding. Once an event starts, the login time is stored in the event’s report.
Exiting an event will generate a logout time.
NOTE: Once an event is terminated, it will be removed from the event list.
If the event needs to be restarted, the Owner or Administrator will need to
recreate the event.
2. Once the event is active, users operating the device will be presented with the
main screen reading START MY TEST. On-screens prompts will guide the user
through the breath test process.
3. The device will prompt the user to insert a straw into the breath port. Real-time
guidance gives the user a visual repersentation of their breath pressure to ensure
a successful breath test.
4. Results are displayed based on preset alcohol level limits.
5. Once a test is competed and the device’s recovery time is over, the main screen
reading START MY TEST will be redisplayed.
6. To end an event, press and hold START MY TEST for 5 seconds, input the
password and exit the event. A report will be automatically generated for the
Owner’s use.