3. How to adjust measurement "unit"
4. How to adjust "beep" (audible warning)
5. How to adjust "blow time"
If the unit is powered on outside of the acceptable temperature
range (0-40 C) the unit will display Out C and the
test cannot be performed.
If the battery indicator display is empty,
install two new alkaline AA batteries.
a) Press the start button and the unit will display the total number of tests
performed for a second and will begin a countdown.
b) During the countdown, press and hold the mode button for more than 5
seconds until the unit displays
If you press the mode button again shortly, the unit displays
c) By pressing the start button, you can adjust the beep level.
a) Press the start button and the unit will display the total number of tests
performed for a second and will begin a countdown.
b) During the countdown, press and hold the mode button for more than 5
seconds until the unit displays
Press mode button shortly until the unit displays
c) By pressing the start button, the blow time can be adjusted.
a) Press the start button and the unit will display the total number of tests
performed for a second and will begin a countdown.
b) During the countdown, press and hold the mode button for more than 5
seconds until the unit displays
c) By pressing the start button, the measurement unit can be adjusted.
HADRON