*1
Starter/starter holder (not applicable for units executed with a high frequency ballast or LED lamps)
*2
i-trap 50 B unit is executed with a magnetic ballast (with starter)
i-trap 50 E unit is executed with a high frequency ballast. (without starter)
i-trap 50 LED unit executed without ballast or starter.
Designed in the Netherlands - Made in China
Certification and declaration
The
i-trap 50
B/E /
i-trap 50
LED
complies with the EU-directive on machine safety
The unit and spare part components are in full compliance with the CE directive and
the WEEE / RoHS directives. The EC declaration of conformity is listed below:
CE declaration of conformity.
We declare, under our responsibility, that the imported product:
Type:
i-trap 50
B/E /
i-trap 50
LED
Insect control unit complies with the following European standards:
* EN 60335-1 Safety of household and similar electrical equipment. Part 1: General requirements.
* EN 60335-2/59 Safety of household and similar electrical appliances.
Part 2: Particular requirements for insect killers.
* EN 55014 Limits and methods of measurement of radio disturbance characteristics
of electrical motor-operated and thermal appliances for household and similar
purposes, electrical tools and similar electric apparatus.
* EN 61000-4-5 Surge immunity requirements (1.2/50 µs and 70/100 µs surge)
* EN 61000-3-2 Electromagnetic compatibility (EMC) Part 3: Limits Section 2: Limits for harmonic
current emissions (equipment input current <16 A per phase) (IEC 1000-3-2:1995)
All according to the definition of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC
• The appliance is not to be installed by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
• Children must be supervised and not to play with the appliance.
• The appliance is to be kept out of reach of children.
• The appliance is not to be used in locations where flammable vapours or explosive dusts are likely to exist.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent or qualified and
licensed electrician in order to avoid a hazard.
Extra attention on the UV Astron LED lamp
The UV Astron LED lamp is developed to guarantee a long a trouble-free lifetime.
The UV Astron LED lamp needs to be cleaned periodically (ideally 4 times per year).
As the UV Astron LED lamps become warmer than the conventional UV fluorescent lamps, they attract
more dirt and organic particles on its surface.
These particles block the UV-A light, which will affect the attraction potential of the UV Astron LED lamp.
Cleaning them with a soapy detergent is therefore essential.
Important warnings
Attention
•indoor use only
•for dry areas only
•recycle lamps & starter
Exploded view
Descriptions of exploded view parts see section B
Recommended Consumables
Pos.
Description
Part number Amount
3
Glueboard
2.06.0100 1
5
i-trap 50
B execution
Philips 15 watt UV-A SP
2.04.0690
2
5
i-trap 50
E
execution
Philips 15 Watt UV-A SP Longlife
2.04.0322
2
5
i-trap 50
LED execution
Astron 15 Watt UV-A LED
2.04.5000
2
7 Starters
*1
2.08.1001
1
i-trap 50B/50E - i-trap 50 LED instruction manual version 2.0
Position:
1 Cover
2 Housing
3 Glueboard
4 Ballast
*2
5 UV-A Lamp
6 Lamp holder
7 Starter
*1
8 Main plug
9 Indicator (50E + LED)
ENGLISH
i-trap 50
B/
50
E
i-trap 50
LED
INSTRUCTION MANUAL
