About the i-trap 120E WP
Safety
Receipt of equipment
The information in this service manual is based on the latest information, and is provided subject to
alteration. We reserve the right to change the construction and/or configuration of the unit at any
time without obligation to modify earlier versions .
Please read this Manual carefully before taking
any action with regard to your i-trap 120E WP.
Congratulations on the purchase of this high quality electric insect-trap. Before using this unit we
ask you to read this manual carefully. If you have any questions afterwards please contact
Alcochem Hygiene, see www.insect-trap.net for details.
The information in this manual is based upon the latest information, and is provided subject to
alteration. We reserve the right to change the construction and/or configuration of the unit at
any time without obligation to modify earlier versions.
Store this manual carefully for future reference.
When using any electrical equipment, basic precautions to reduce the risk of fire, electric shock
and personal injury must always be followed including, but not limited to, the following:
• Consider the work area environment. Keep the work area clean and well lit.
• The unit should be connected to mains power (110-240 V ~ 50-60 Hz or 220-240 V ~ 50-60 Hz)
• Do not use in the presence of flammable materials.
• Do not damage the power cable. Keep it away from heat, oils and sharp edges.
• Maintain the unit with care. Keep the unit clean for effective and safe performance.
Follow instructions for changing accessories.
• Disconnect mains power when not in use, before servicing, and when changing accessories
or components.
• Make a habit of checking to see that service tools are removed from the fly control system
before turning it on.
• The use of any accessory or attachment other than recommended in these operating
instructions may present a risk of personal injury.
• The unit complies with relevant safety rules.
• Repairs should only be carried out by qualified persons using original spare parts.
Failure to comply with this direction may result in considerable danger to the user.
• Use a safe mains connector with a proper earth pin.
• Wiring in the fly control system meets safety standard EN 60335-2-59
• Always leave repairs (
other than cleaning, glue board replacement or replacing the lamp
)
to your dealer/distributor.
Note:
Only use lamps and spare parts from Alcochem Hygiene for service and maintenance.
While unpacking, check for any signs of shipment damage and, if found, notify both transporter
and supplier in writing within 8 days of receipt with full details of the damage that has occurred
and retain the equipment and packing materials for inspection.
• Check that all parts have been received as ordered.
• Make sure that all packaging is removed from the unit before use.
Notes
