5
sec
5
sec
5
sec
5
sec
5
sec
5
sec
5
sec
5
sec
Display off
Display on
7
ATTENTION:
The lamp
(F)
will only fit into the lamp fitting
(H)
in one way
(see Drawing 6).
7. Place the (new) 3M High Air Flow (HAF) filter
(E)
into the
filter holder
(D)
.
8. You can now reinsert the filter grid
(C)
into the filter holder
(D)
and tighten it with the 2 screws
(B)
.
9. Insert the plug into the socket and check the operation of the
UV-C lamp
(H)
- only do this through the air vents at the top
of the unit! Blue light can be seen through the air vents of the
lid
(I)
if the lamp is on (see Drawing 1).
1
0. Check the operation of the ventilator
(K)
by holding your
hand underneath the filter grid
(C)
. If you feel an air flow, the
ventilator
(K)
is working (see Drawing
1
).
Technical specifications
• AIR 160
65 Watt
• Philips PL-L
60W/4P HO lamp
60 Watt
• UV-C Dose
4.23 mJ/cm
2
(air flow 50 m3/hr)
• UV-C (W) output
19.0 Watt
• UV-C (%) after 8,000 hours 85 %
• Filter (HAF)
3MTM High Air Flow Air Filter
• Ventilator
12 Volt
• Max. area capacity
100 m
3
• Max. throughput
50 m
3
of air per hour
• Dimensions of the device 60 x 17 x 15 cm
Type of UV-C system
Article number:
2.25.1000
AIR 160
100 m³ / 60 Watt (230V/120V; 50/60 Hz)
Replacement articles
Article number:
2.25.1050
Philips PL-L 60/4P HO (60 Watt)
Article number:
2.25.1150
3M AIR 160 filter
Terms of guarantee
The guarantee for this product covers manufacturing faults for a
period of 24 months following the date of purchase. The lamp is
not included in this guarantee.
Claims under the guarantee can only be considered if the product
is returned post-paid together with a guarantee registration form
and a valid purchase receipt.
Repairs under the guarantee may only be carried out by the
supplier. Guarantee claims that are caused by errors in the
installation or in the operation of the device will not be considered.
Defects originating from poor maintenance are also excluded from
the guarantee. The supplier will not be held responsible in any way
whatsoever for any damage caused by the incorrect operation of
the product.
The supplier will not be liable for any consequential damage
caused by the breakdown of the device. Complaints regarding
transport damage will only be considered if the damage was
established or confirmed on delivery by the carrier or the postal
authorities.
A claim can only be made against the carrier or the postal
authorities if this has been done.
EN
