ADDITION OF HYDRAULIC
Use only compressed air. Check airline for damage from humidity &
contaminants. In order to protect the tool from premature wear, we recommend
the use of a filter, lubricator & regulator. Air connection size ¼” NPT.
WARNING:
Do not use air supply greater than recommended
or tool may be damaged or burst.
NORMAL OPERATION
1. Connect the air supply then switch
ON/OFF valve to ON position.
2. To turn on and adjust the Vacuum
system remove mandrel nail container
and rotate bar counter-clockwise
Adjust the amount of suction the
vacuum system needs to hold the rivet
in place and to eject spent mandrel
into collection cup. Replace nail
container.
If you don’t want to use vacuum
WARNING: ALWAYS WEAR SAFETY GLASSES
WHEN OPERATING AND PERFORMING MAINTENANCE ON TOOL
