EN-13
EN
ADDITIONAL INFORMATION
Disconnect the audio system from the power source before performing any maintenance.
Cleaning
Clean the exterior of the system using a soft dust cloth.
CD Player
CAUTION! This system operates with a laser. It must be opened by only a qualified technician.
Handling CDs
• Do not touch the signal surfaces. Hold CDs by the edges, or by one edge and the hole. Do not affi x labels or
adhesive tapes to the label surfaces. Do not scratch or damage the label. CDs rotate at high speeds inside
the player. Do not use damaged (cracked or warped) CDs.
Cleaning CDs
• Dirty CDs can cause poor sound quality. Always keep CDs clean by wiping them gently with a soft cloth from
the inner edge toward the outer perimeter.
• If a CD becomes dirty, wet a soft cloth in water, wring it out well, wipe the dirt away gently, and then remove
any water drops with a dry cloth.
• Do not use record cleaning sprays or antistatic agents on CDs. Also, never clean CDs with benzene, thinner,
or other volatile solvents which may cause damage to disc surface.
Technical specifi cations
Rating Plate: Look for it at the back of the set.
The descriptions and characteristics given in this document are given as a general indication and not as a guar-
antee. In order to provide the highest quality product possible, we reserve the right to make any improvement or
modification without prior notice. The English version serves as the final reference on all products and operational
details should any discrepancies arise in other languages.
