Bike Care
Using solvents or harsh abrasives to clean your carbon bike could damage the finish or even com-
promise its structural integrity. To care for your Arktos, simply wash with warm sudsy water, using
a soft cloth, sponge or soft bristle brush to clean off heavier buildup. Rinse thoroughly (if you use
a hose, don’t direct high-pressure spray at your bike). Dry with a soft towel and apply a coating of
wax or other surface protectant, followed by a gentle buffing. Be careful not to get any overspray
on the brake surfaces.
Now that the frame is clean, it’s a good time to check your frame thoroughly for any signs of
carbon damage that may impact the frame’s integrity. If you suspect your frame may have damage
affecting the structural integrity, take your bike to a bike shop or call Alchemy immediately.
Checklist
•
Make sure all frame surfaces in contact with cables are protected. Cable housing rubbing
on carbon can wear over time.
•
Make sure brake levers, handle bar ends and the fork crown do not contact the frame at
full rotation.
•
Never clamp any part of a carbon frame in a bike stand or car-rack.
•
Never tighten a seat post clamp without a post in the frame.
•
Always inspect your frame if you experience any chain suck.
•
Always inspect your frame in full after a crash to be sure there is no damage. Look for
cracks, dents or loose fibers. Any direct impact to the frame can cause serious structural
damage.
MAINTENANCE
7
