DESIGNED & MANUFACTURED IN HERTFORDSHIRE, ENGLAND
(2)
BNC
A L C H E M I S T
C L A S S 1
A U D I O
P R O D U C T
SERIAL NUMBER:
P R O D U C T
E I G H T
D
A
C
8
DO NOT REMOVE ANY CHASSIS
PANELS. NO USER SERVICEABLE
PARTS INSIDE - REFER ALL
SERVICING TO QUALIFIED
PERSONNEL.
MAINS FUSE
:
Ensure correct rating and
type for voltage used!
THIS PRODUCT MUST BE
EARTHED.
MAINS INPUT AC ONLY~
110 - 120V, 60Hz
Fuse Rating: T1A
220 - 240V, 50Hz
Fuse Rating: T500mA
Do not remove any
panels for risk of
electric shock!
This unit has been factory set
to operate at the voltage
marked below:
Peak Power Consumption: 12W
(4)
BALANCED
(AES/EBU)
(5)
(HIGH LEVEL)
8
- LINK
DIGITAL INPUTS
ANALOGUE OUTPUTS
BALANCED
RIGHT CHANNEL
LEFT CHANNEL
BALANCED
RCA
RCA
(1)
RCA
(3)
OPTICAL
SOURCE CONNECTIONS
GENERAL CARE
Any cleaning of your
P
RODUCT
8
DAC should be done with a clean dry cloth or soft bristle brush. There is no
need to polish the gold effects, a simple dry wipe is sufficient.
Do not use any solvent or silicone based cleaning solutions as this may result in tarnishing.
Remember to replace all of your packaging in the box and re-seal. Keep the box for any future transportation of
your product.
As with all connections ensure that the equipment is switch off before you attempt to connect any cables. Also
we recommended that, where possible, you use gold phono plugs on your interconnect leads as the phono
sockets on the
There are 5 different digital inputs available from the Product
8
DAC. Each of the digital inputs have different
type of connections, RCA, BNC, Optical, Balanced and
8
-Link. Make sure the correct input socket is used for
any external device. The
Product
8
DAC are gold plated. Gold to gold connections will ensure that a good electrical
contact is maintained without the need for periodic cleaning.
8
-Link is solely to be used with the Product
8
range products, i.e. Product
8
Transport.
The Product
8
DAC provides two different types of analogue outputs, Balanced and RCA. For the connection,
ensure the ‘Right’ output is connected to the ‘Right’ input, and the ‘Left’ output is connected to the ‘Left’ input
of your amplifier.
Please note that we do not supply interconnect leds as most people like to choose their own. Unbalance (RCA)
leads should not be more than 3 metres long, and balance (XLR) leads can be any length.
