2
When connected to an appliance, remember to turn on the inverter before
turning on the appliance. if the buzzer sounds during operation, this indicates
that the battery voltage is very low and that the inverter will be shut-down.
(When over load happens it will be shut-down, untill user reduces loading.
and restart your inverter.)
Please check the fuse in the cigarette plug if the blackout indicator is not lit
during operation. When replace blown fuses, please refer to "15". Specification
on page 7 , page 8
.
and page 9
The inverter will switch off automatically if the total wattage of the electrical
appliance exceeds the inverter's output capacity. This will also happen if the
temperature of the inverter exceeds 55 C due to prolonged use.
"Turn on"
second
"Turn on"
first
3
Unplug the AC inverter when not in use.
Unplug the AC inverter when starting the vehicle's motor.
If the AC inverter makes a beeping sound:switch off your appliance, unplug
the inverter and restart your vehicle's engine. The beeping sound is simply
the low-battery warning which indicates that the voltage of your battery is getting
low. Your inverter will shut down automatically if you do not restart your engine
and continue the use of your inverter. This will leave your vehicle's battery at
about 10.5VDC(21VDC when using 24V input, enabling you to start your engine
and resume operation of the inverter. it also eliminates the possibility of being
stranded with a dead battery.)
To avoid over-discharging the battery, it is advisable to let your engine run for
10 to 20 minutes after every 2-3 hours of using the AC inverter. This allows
your vehicle's battery to recharge.
Please remember to connect the "+" wire to the "+" terminal and the "-" wire
to the "-" terminal if you choose to use an adapter in order to establish a
direct connection between the AC inverter and the battery terminals. IF YOU
CONNECT THE WIRES TO INCORRECT TERMINALS, THE POLARITY WILL
BE REVERSED AND THIS WILL DAMAGE THE FUSE.
REVERSED POLARITY SHOULD BE AVOIDED.
Please remember to disconnect AC inverter before using the battery
charger to replenish you battery's voltage. Failure to disconnect the inverter
prior to connecting a charger may result in an input spike which will damage
the inverter.CONNECTING THE INVERTER'S INPUT TO A BATTERY CHARGER
WILL VOID THE WARRANTY AND MAY DAMAGE THE INVERTER.
Make sure that the battery's voltage never exceeds 15VDC (30VDC when 24V
version is used.CONNECTING THE INVERTER TO A DC POWER SOURCE
GREATER THAN 15VDC( MORE THAN 30VDC WHEN YOU ARE USING 24V
INVERTER .THE INVERTER WILL BE SHUT DOWN AUTOMATICALLY.
PDF created with pdfFactory Pro trial version
www.pdffactory.com