1. Tap during the active conversation, the call is put on hold.
Pre-dialling:
enter the phone number and pick up the handset or tap
Dial
.
Direct dialling:
lift the handset and enter the phone number and tap
Dial
.
Handsfree:
enter phone number and press or vice versa .
Headset:
enter phone number and press or vice versa.
•
Tap >
User settings
>
Language
.
•
•
With the handset :
pick up the handset.
•
With a headset :
press .
•
With the handsfree :
press
.
•
•
•
•
Make sure the SD card is inserted, during an active call tap .
Tap . To retrieve the call tap .
Note:
with more than one active call, select desired call with the navigator keys and use the corresponding
key to hold or resume.
Tip
: if you press on an unassigned programmable function key, the configuration interface will open
directly.
•
-
Select the desired language.
Language setting
Recording a call
Putting a call on hold
Making a call
Accepting a call
3-party conference
Redial
Call list
Call forward
Attended transfer:
Blind transfer:
Access phonebook:
Add new entry:
Program function keys (lines, memory, call forward, BLF, etc):
Register a compatible Alcatel DECT accessory:
1. Tap .
1. Tap , then tap .
1. Tap or tap >
Call Settings
>
Do not disturb
.
1. To access your voice mailbox, tap or .
1. Tap >
User Settings
>
DECT
>
DECT Headset
or
DECT Handset
.
2. Tap
Register
.
3. Perform the steps indicated in your Alcatel compatible device’s installation guide.
2. Select the line and tap to call.
1. Tap or , then tap .
2. Tap the desired feature key (displayed on the left of the screen), then select the required feature and
fill in parameters if any and tap
Save
.
2. Enter name and number and tap
Save
.
To dial an entry, tap the required phone number .
1. Tap during the active conversation, the call will be on hold.
2. Then tap , dial the 2nd telephone number. Call is blind transferred.
2. Tap , enter the second telephone number and tap
Dial
.
3. When the call is answered, then tap to complete the operation.
1. Check phone IP address taping .
2. Open a web browser on your computer. Enter http:// and the IP address in the address bar and validate.
3. Default login and password are « user/user » for users and « admin/admin » for administrator.
4. Minimum config is sip account. Check administrator guide for details.
1. Once in line with 1st caller, tap , 1st caller is put on hold.
1. Tap , select the desired call in the list and tap .
1. Tap .
1. Tap > then select
Call Forward
.
2. Select the line, the type of forward, enter the destination number, then enable the call forward
and tap
Save
.
2. Scroll through
All calls
or
Missed calls
using the scrolling bar.
3. To dial an entry, tap .
2. Tap , then enter 2nd number and tap
Dial
.
3. Once 2nd call is established, tap to set up the conference.
Phone web interface
Call transfer
Phonebook
Programmable keys
Do not Disturb
Voice mail
DECT Accessories
