Alcatel Speed Touch USB PPPoE, User Manual

Page: 57 / 60

Servicing
Damage requiring
service
Modem/Telephone use
Modifications
AppendixC Safety and Agency Regulatory Notices
57 / 60
3EC 17545 AAAA TCZZA Ed. 02
To reduce the risk of electric shock, do not disassemble this
product. None of its internal parts are userreplaceable; therefore,
there is no reason to access the interior. Opening or removing
covers may expose you to dangerous voltages. Incorrect
reassembly could cause electric shock if the appliance is
subsequently used.
If service or repair work is required, take it to a qualified service
dealer.
Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
When the power supply cord or plug is damaged or frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or water.
If the product does not operate normally.
If the product has been dropped or damaged in any way.
If the product exhibits a distinct change in performance.
Avoid using a modem/telephone (other than a cordless type)
during an electric storm. There is a slight risk of electric shock
caused by lightning.
Do not use the telephone to report a gas leak in the vicinity of the
leak.
If telephone service is required on the same line, a central splitter
or distributed filter(s) must be installed for optimal ADSL
performance.
Depending on your ADSL configuration and type of splitter/filters,
installation must be carried out by qualified service personnel.
Consult your telephone service company or ADSL service provider
for instructions.
Changes or modifications not expressly approved by Alcatel could
invalidate the users authority to operate this equipment.