Slot Numbering
Managing OmniSwitch 6400 Series Stacks
page 5-18
OmniSwitch 6400 Series Hardware Users Guide
April 2011
Slot Numbering
For a stack of OmniSwitch 6400 Series switches to operate as a virtual chassis, each module in the stack
must be assigned a unique slot number. To view the current slot assignments for a stack, use the
show ni
or
show module
commands. The slot number is also displayed on the front panel of each switch by the
LED located on the left side of the chassis (refer to
“LED Status Indicators” on page 2-20
for more infor-
mation).
There are two ways stacking modules are assigned slot numbers:
•
Dynamic slot number assignment by the system software
•
Manual slot number assignment by the user
