5
6
Charging the battery
Connect the battery charger to your phone and mains socket
respectively.
The charging may take about 20 minutes to start if the
•
battery is flat.
Be careful not to force the plug into the socket.
•
Make sure the battery is correctly inserted before
•
connecting the charger.
The mains socket must be near to the phone and easily
•
accessible (avoid electric extension cables).
When using your telephone for the first time, charge the
•
battery fully (approximately 3 hours). You are advised to
fully charge the battery (
).
To reduce power consumption and energy waste, when
•
battery is fully charged, disconnect your charger from the
plug; reduce the backlight time, etc.
The charge is complete when the animation stops.
2.2
Power on your phone
Hold down the
key until the phone powers on.
2.3
Power off your phone
Hold down the
key from the main screen.
2
Getting
started
........
2.1
Set-up
Removing and installing the back cover
Removing and installing the battery
Inserting and removing the SIM card
Place the SIM card with the chip facing downwards and slide it
into its housing. Make sure that it is correctly inserted. To
remove the card, press it and slide it out.
Your phone only supports mini SIM card. Do not
attempt to insert other SIM types like micro and
nano cards, otherwise you may damage your
phone.
IP4572_ALCATEL 1009X_QG_Eng_GB_04_140219.indd 5-6
IP4572_ALCATEL 1009X_QG_Eng_GB_04_140219.indd 5-6
2014-2-19 16:19:10
2014-2-19 16:19:10
